real-time battery monitoring systems

팝업레이어 알림

팝업레이어 알림이 없습니다.

PRODUCT

Total solution in battery management.

BMS i-com

Battery Monitoring System

Introduction

BMS i-com is available to detect appropriate replacement time and abnormality of the battery over time as an economical system. This is done by monitoring the characteristic data of 12V battery cell as well as the charging/discharging current of the string. Available to measure 12V batteries from 4 cells, and easily connected with any other supervisory systems, such as SCADA.

Character

  • Suitable for small sized UPS batteries
  • Monitor 12V 4cells per battery bank
  • Application: Generator, Substation, Charger, Power distributor, Telecommunication equipment

Specification

Measurement RangeBattery Capacity : 5 ~ 6,000 Ah
System Voltage : 0 ~ 55 VDC
Load Current : ±999.9 A
Cell Voltage : 12 V
Internal Resistance : 0.001 ~ 99.999 mΩ
Temperature : -20℃ ~ 80°C
Accuracy / ResolutionSystem Voltage : ±0.5% / 0.1 V
Load Current : ±1% / 0.1 A
Cell Voltage : ±0.5% / 0.01 V
Internal Resistance : ±2% / 0.001 mΩ
Temperature : ±2% / 0.5 °C
I.R. (Internal Resistance) Measurement Speed3 seconds per cell
Data AcquisitionMeasuring Interval : Adjustable from 10 min to 24 hours (voltage & resistance)
Data Transfer : TCP/IP, RS-232
Internal Storage : 20 Records, Approximately 20 days backup
SoftwareCentroid Snet1, Centroid Snet2
EnvironmentOperating Temperature : 0 ~ 65 °C (32 ~ 150 °F)
Relative Humidity : Under 80%
Power RequirementsInput Power : 38 - 58 VDC (from connected batteries)
DimensionsMain Unit : 140 x 120 x 42 mm (5.5 x 4.7 x 1.7 in)

Installation pictures

  • BMS i-com 설치사진
  • BMS i-com 설치사진
  • BMS i-com 설치사진
waton

COMPANY | LOCATION

309~311, 3 Godeung-ro, Sujeong-gu, Seongnam-si, Gyeonggi-do, Korea
TEL : +82-31-721-5787 FAX : +82-31-752-1852

ⓒ 2018 WATON Inc. All Rights Reserved.